The Power-Stud anchor is a fully threaded, torque-controlled, wedge expansion anchor designed for consistent performance in cracked and un-cracked concrete. The bolt is a construction grade fastene...
The Power-Stud anchor is a fully threaded, torque-controlled, wedge expansion anchor designed for consistent performance in cracked and uncracked concrete. The bolt is a construction grade fastener...
10mm (3/8”) glue in is undoubtedly the most commonly used resin anchor in the world. The shape of the eyelet has been designed to withstand high levels of tensile or shear force. These bolts are 10...
The Rawl 5-Piece sleeve bolt is a construction grade fastener that is commonly used as a climbing anchor. Expansion is created by tightening a threaded bolt which draws a tapered cone expanding a s...
A 10mm (3/8”) stainless steel AISI 316L (A4) bolt, ideal for use in climbing and mountaineering anchors. Requires hard compact rock (limestone, dolomite). Do not use on soft rocks (such as sandston...
The Power-Stud anchor is a fully threaded, torque-controlled, wedge expansion anchor designed for consistent performance in cracked and uncracked concrete. The bolt is a construction grade fastener...
The Rawl 5-Piece sleeve bolt is a construction grade fastener that is commonly used as a climbing anchor. Expansion is created by tightening a threaded bolt which draws a tapered cone expanding a s...
Stainless steel anchor with a semi-circular eyelet, hence the name Radius. Designed to deliver high performance in tensile and shear strength. Like the “Superstar”, the shank is 10 mm diameter with...
ndividual Belay Station in 316L stainless steel for outdoor environment. Designed and manufactured in Barcelona.Diameter: 10mm (for hole installations 12mm or 1/2in). Insertion length: 90mm (3.55in...
A 8mm (~5/16”) stainless steel AISI 316L (A4) bolt, recommended for caving and rescue anchors ONLY. These bolts are not designed to take dynamic loading from from climbing or mountaineering falls. ...
12mm (1/2"”) glue ins are strong and secure stainless steel resin anchor designed for placing quickdraws and building belays on mountaineering and climbing routes. These bolts are 12mm in diameter ...
Designed to last generations, even in the harshest climbing environments! These bolts will fit a 14mm hole, with the strong spring interference fit, ensuring they will not slide out when placed in ...
Designed to last generations, even in the harshest climbing environments! These bolts will fit a 12mm hole, with the strong spring interference fit, ensuring they will not slide out when placed in ...
The Power-Stud anchor is a fully threaded, torque-controlled, wedge expansion anchor designed for consistent performance in cracked and uncracked concrete. The bolt is a construction grade fastener...
The 10mm (3/8”) x 80mm stainless steel resin anchor is used to create abseiling or top-rope anchors. The dual rings allow for easy retrieval of the rope from below. They also allow the rope to func...
A 12mm (~1/2”) stainless steel AISI 316L (A4) bolt, ideal for use in climbing and mountaineering anchors. Requires hard compact rock (limestone, dolomite). Do not use on soft rocks (such as sandsto...
When placed properly in good stone glue-in bolts are the strongest anchors available. Patience and experience are required when installing glue-in bolts. The mixing and installation of the glue is ...
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.
