将图像加载到画廊查看器中,Tomahawks - MOSES - ExtremeGear.org
将图像加载到画廊查看器中,Tomahawks - MOSES - ExtremeGear.org
将图像加载到画廊查看器中,Tomahawks - MOSES - ExtremeGear.org
将图像加载到画廊查看器中,Tomahawks - MOSES - ExtremeGear.org
将图像加载到画廊查看器中,Tomahawks - MOSES - ExtremeGear.org
将图像加载到画廊查看器中,Tomahawks - MOSES - ExtremeGear.org
将图像加载到画廊查看器中,Tomahawks - MOSES - ExtremeGear.org
将图像加载到画廊查看器中,Tomahawks - MOSES - ExtremeGear.org
将图像加载到画廊查看器中,Tomahawks - MOSES - ExtremeGear.org
将图像加载到画廊查看器中,Tomahawks - MOSES - ExtremeGear.org

战斧 - 摩西

正常价格 810.00TL
销售价格 810.00TL 正常价格
销售 售罄
单价
/每 
运输在结帐时计算出来。
库存并准备运输
选项:
尺寸:
预订文本

战斧是一种钩状皮顿,用于薄接缝。 它主要设计为薄钉片,需要使用锤子,但也可以手动放入“喙槽”或薄裂缝中的自然收缩中。 该设计使清洁更轻松、更快捷,以防止工件固定。 战斧有三种不同的版本-标准 (直),左,右以及三种不同的尺寸-#1,#2和 #3。 左右版本是弯曲的,用于角落。

附加信息

Features

Curved stem: The curved stem allows for greater clearance over irregularities in the rock surface and allows the “beak” to be buried deeper in bomber placements; it also allows for greater hooking potential when used in clean placements.

Improved hooking action: The “hooking action” of the Tomahawk is superior to that of the Pecker and Birdbeak, due to the longer, curved stem and forward positioning of the cable hole. This greater hooking action helps the Tomahawk to stick better when hand placed and when used as more of a hook than a piton.

Multiple hammering surfaces: In addition to the primary hammering surface used to drive the Tomahawk into a crack (b.), there are four hammering surfaces that can be used to clean the piece – two for upward hammering (c. and e.), one for downward hammering (a.), and one for upward hammering, which through rotation, levers the blade outward (d.).

Larger cable hole: The cable hole allows up to 5/32″ cable (#4 head); Tomahawks are originally fitted with a small loop of 1/8″ cable (#3 head). The small loop is designed to maximize climbers’ reach.

Top and bottom tie-off holes: The two tie-off holes on the #1 and #2 sizes will accept a single strand of 9/16″ supertape webbing or a bight (strand doubled-over) of 1/2″ tie-off webbing. The two tie-off holes on the #3 size will accept a bight of 9/16” supertape webbing and the top hole on the #3 size will accept a carabiner, for horizontal placements or for racking purposes.

The top hole can be used to tie-off the Tomahawk when it is placed in a horizontal crack. Although the Tomahawk is not designed for horizontal cracks, it can be used as a last resort when you have no knifeblades or RURPs left on the rack, or when such pitons are too wide. For shallow, tipped-out horizontal placements, the blade of the Tomahawk can be tied-off to reduce leverage (instead of using the hole).

The top hole can also be used to assist in cleaning the Tomahawk if it is fixed or stubborn during removal, with the GENTLE use of a funkness device and a 3/16” quick-link or loop of tie-off webbing. If the Tomahawk is hand-placed and becomes wedged when weighted, such that a simple pull with the fingers doesn’t pop it loose, a “pull-tab” made of a length of 1/2″ tie-off webbing can be used to give the piece a good yank outward and slightly upward. Thread a piece of webbing through the top hole and tie an overhand knot towards the end to form a pull-tab.

The bottom hole can be used to tie-off the Tomahawk if it is fixed and the cable is missing, or if the original cable has been damaged/worn out/frayed and must be removed, yet cannot readily be replaced.

Left and right versions: Tomahawks are also available in left (red) and right (blue) versions, for use in corners. The upper bend enables better hammer contact with the primary hammering surface (b.) during placement, and the lower bend provides clearance for the cable to prevent cable damage against the rock. The left version (red) will fit left-facing corners with a straight-in crack and right-facing corners with a crack that is parallel to the face. The right version (blue) will fit right-facing corners with a straight-in crack and left-facing corners with a crack that is parallel to the face.

眼镜

#1

Heat-treated 4130 chrome-moly steel

Thickness = 1/8” (0.125”)

Laser-cut shape

Top hole = 5/16” (0.312”), bottom hole = 5/16” (0.312”), cable hole = 5/32” (0.156”); all holes chamfered

1/8” (#3) 7×19 galvanized aircraft cable clip-in loop with zinc-coated copper sleeve

PVC heat-shrink covering sleeve; color coded for straight (black), left (red), and right (blue)

Weight = 53.0 g / 1.87 oz.

#2

Heat-treated 4130 chrome-moly steel

Thickness = 5/32” (0.160”)

Laser-cut shape

Top hole = 3/8” (0.379”), bottom hole = 25/64” (0.393”), cable hole = 13/64” (0.2”); all holes chamfered

1/8” (#3) 7×19 galvanized aircraft cable clip-in loop with zinc-coated copper sleeve

PVC heat-shrink covering sleeve; color coded for straight (black), left (red), and right (blue)

Weight = 94.6 g / 3.34 oz.

#3

Heat-treated 4130 chrome-moly steel

Thickness = 3/16” (0.1875”)

Laser-cut shape

Top hole = 5/8” (0.625”), bottom hole = 29/64” (0.454”), cable hole = 13/64” (0.2”); all holes chamfered except for middle lightening hole

1/8” (#3) 7×19 galvanized aircraft cable clip-in loop with zinc-coated copper sleeve

PVC heat-shrink covering sleeve; color coded for straight (black), left (red), and right (blue)

Weight = 137.5 g / 4.85 oz.

你可能也会喜欢

正常价格 来自279.00TL
销售价格 来自279.00TL
正常价格
单价
每 
这些是轻质吊索,由 11 毫米 UHMWPE 怪物吊索织带制成,非常适合高山路线。 现在有 5 种不同的长度,10 英寸到 189 英寸。 随机颜色。
选择选项
正常价格 来自688.00TL
销售价格 来自688.00TL
正常价格
单价
每 
凸轮钩用于平稳快速地爬上裂缝。利用杠杆作用将体重转化为对岩石的抓握力。放置保护件就像自由攀岩一样。用干净的金属“手指锁”爬过古怪的位置。过度弯曲的钩子有一个微妙的沙漏形尖端,可以锁定在裂缝和针痕中。织带系绳孔周围的光滑表面可减少织带磨损。仿照 Ed Leeper 的惊人设计。
选择选项
正常价格 来自889.00TL
销售价格 来自889.00TL
正常价格 889.00TL
单价
每 
对于细微裂纹、细微接缝和不明显的裂缝,Pecker 的薄如刀刃的双锥形刀片可以胜任其他工具无法完成的任务。Pecker Pitons 特点 锯齿齿在软岩中提供购买 一体式钢丝吊索 有三种尺寸可供选择
选择选项
正常价格 来自668.00TL
销售价格 来自668.00TL
正常价格
单价
每 
可在宽和尖。 在小边缘和薄片上使用宽的向上进展。 尖锐的洛根钩特别适合蝙蝠钩孔,时间逐渐变细。 织带颜色会有所不同。
选择选项
buy